Anda dapat melihat informasi dan gambar produk ini lebih lengkap di website resminya, silahkan untuk klik tombol berikut untuk melihat informasi lebih lanjut
When you demand uncompromising performance plus several I/O options from your audio interface, then you need RME’s Fireface UFX. This outstanding USB 2.0/FireWire interface gives you 30 input and 30 output channels, digitally controlled preamps, a range of digital I/O options, and an onboard word clock. You’ll love the Fireface UFX’s included TotalMix FX DSP mixer and signal router; it maximizes what the Fireface UFX can do while it improves your workflow. The full-color front-panel display lets you meter plus view parameters and menus. The Fireface UFX can even be configured for standalone use as a preamp, a monitor mixer, an AD/DA converter, and more.
If it’s I/O flexibility you’re seeking, then look no further than the Fireface UFX! You don’t just get 12 channels of premium analog I/O; you also get AES/EBU, ADAT, S/PDIF, and MIDI I/O. You also get a rock-solid onboard word clock. RME did an outstanding job of making the Fireface UFX the ideal centerpiece for your studio setup. This incredible single-rackspace interface even includes built-in monitoring control. When you couple that functionality with the TotalMix FX DSP mixer/router, you have a total studio solution.
RME Fireface UFX 30 x 30 USB/FireWire Interface Features:
24-bit/192kHz
30 Input / 30 Output channels
12 x Analog I/O
4 x Mic/Instrument Preamp, digitally controlled
1 x AES/EBU I/O
2 x ADAT I/O (or 1 x ADAT I/O plus 1 x SPDIF I/O optical)
1 x Word Clock I/O
2 x MIDI I/O
1 x FireWire 400
1 x USB 2.0
TotalMix FX DSP mixer/ signal router
AD, Line-in 1-8, rear
Signal to Noise ratio (SNR): 110dB RMS unweighted, 113dBA
Frequency response @ 44.1kHz, -0.1dB: 5Hz – 21.5kHz
Frequency response @ 96kHz, -0.5dB: 5Hz – 45.5kHz
Frequency response @ 192kHz, -1dB: 5Hz – 66.5kHz
THD: < -110dB, < 0.00032%
THD+N: < -104dB, < 0.00063%
Channel separation: > 110dB
Input: 1/4″ TRS jack, electronically balanced
Input sensitivity switchable to Lo Gain, +4dBu, -10dBV
Input level for 0 dBFS @ Lo Gain: +19dBu
Input level for 0 dBFS @ +4 dBu: +13dBu
Input level for 0 dBFS @ -10 dBV: +2dBV
Microphone In 9-12, front
Input: XLR, electronically balanced
Signal to Noise ratio (SNR): 112dB RMS unweighted, 115dBA
Gain range: 65dB
Maximum input level, Gain 0dB: +12dBu
Instrument In 9-12, front
Input: 1/4″ TS jack, unbalanced
Signal to Noise ratio (SNR): 112dB RMS unweighted, 115dBA
Gain range: 55dB
DA, Line Out 3-8, rear
Dynamic range (DR): 115dB RMS unweighted, 118dBA
Frequency response @ 44.1kHz, -0.5dB: 5Hz – 22kHz
Frequency response @ 96kHz, -0.5dB: 5Hz – 34kHz
Frequency response @ 192kHz, -1dB: 5Hz – 50kHz
THD: -104dB, < 0.00063%
THD+N: -100dB, < 0.00%
Channel separation: > 110dB
Output: 1/4″ TRS jack, servo-balanced
Output impedance: 75 ohm
Output level switchable Hi Gain, +4 dBu, -10dBV
Output level at 0dBFS @ Hi Gain: +19dBuB
Output level at 0dBFS @ +4dBu: +13dBu
Output level at 0dBFS @ -10dBV: +2dBV
DA – Stereo Monitor Output XLR (1-2)
Output: XLR, balanced
Output level switchable 24dBu, Hi Gain, +4dBu, -10dBV
Output level at 0dBFS @ 24dBu: +24dBu
DA – Stereo Monitor Output Phones (9-12)
Output: 1/4″ TRS stereo jack, unbalanced
Maximum output level at 0dBFS, High: +13dBu
Maximum output level at 0dBFS, Low: +2dBV
Output impedance: 30 ohm
AES/EBU
XLR, transformer-balanced, galvanically isolated, according to AES3-1992
ADAT Optical
4 x TOSlink, format according to Alesis specification
Standard: 2 x 8 channels 24-bit, up to 48kHz
Double Speed (S/MUX): 2 x 4 channels 24 bit 96kHz
Quad Speed (S/MUX4): 2 x 2 channels 24 bit 192kHz
Word Clock
BNC, switch for internal termination 75 ohm
RME’s flagship Fireface UFX interface gives you the connectivity and premium sound quality you need for your ultimate DAW setup!